Paasche Hobby Spray Booths are semi-enclosed area used for airbrushing small item. They are equipped with fans and filters to suck out the over-spray and keep the atmosphere dust-free.


Paasche HB-16-13 spraybooth
Working dimensions are 16.5W x 13.5H x 19D, perfect for anything from small ceramics to Radio Control Models. Equipped with 115 Volt fan, 25W. Uses a fiberglass filter system. This spray booth is intended to remove larger particles from the air. NOT INTENDED FOR USE WITH HAZARDOUS MATERIALS, FLAMMABLE OR EXPLOSIVE PAINTS OR MATERIALS. If necessary, wear goggles and/or protective paint and vapor mask. 4 dryer duct adapter included. Two booth can be combined in to one larger model!

Paasche HSSB-22-16 Spray Booth
The HSSB Series is a table top paint booth and suitable for application using an airbrush or spray cans. Air is channeled from the open booth face and then pulled through the rear filter area. Your overspray particulate matter is caught by the filters and the fumes are discharged out through the 4″ dryer duct connection. Working Dim: 22″ wide x 20″ deep x 16″ high.

Included:
-6″ Exhaust fan which plugs into a standard 4″ dryer hose house outlet connection. Approximately 270 CFM
-(1) AG-8″ Fiberglass filter.
-(1) CHAR-8″ Carbon Filter.
-Full assembly drawing and instructions.


Paasche HSSB-30-16 Spray Booth
The HSSB Series is a table top paint booth and suitable for application using an airbrush or spray cans. Air is channeled from the open booth face and then pulled through the rear filter area. Your overspray particulate matter is caught by the filters and the fumes are discharged out through the 4″ dryer duct connection.

-Working Dim: 30″ wide x 20″ deep x 16″ high
6″ Exhaust fan which plugs into a standard 4″ dryer hose house outlet connection.
-Approximately 540 CFM
-(2) fiberglass and (2) carbon filter included
– Full assembly drawing and instructions
– All hardware included